亚洲精品乱码日本按摩久久久久,老司机午夜精品免费福利视频,亚洲AV码天堂一区二区三区

產品全庫

測厚儀

日本共立水質測試包

禾威控制器

工業(yè)放大鏡

水質分析儀

金相設備及耗材

SCS離子污染測試儀

輻射檢測儀

EXTECH產品

DICKSON產品

孔徑測量儀

ECI CVS產品

PCB殘厚測量儀

美國MLA菲林尺

kocour產品

硬度計

電子天平

Omega產品

UV測量計

UV能量計

其它產品

實驗室器皿

首頁>>水質分析儀>>哈納HANNA>>Manual Calibration Dissolved Oxygen Meter

商品名稱: Manual Calibration Dissolved Oxygen Meter

商品編號: 溶氧儀

商品規(guī)格: 便攜式溶氧儀

凈重含量: DO水質測試儀

產品說明
詳細描述
產品配置
更多產品

Automatic Temperature Compensation
Affordable and efficient
DO probe and carrying case included

便攜式DO溶氧儀/溶解氧測試儀/Manual Calibration Dissolved Oxygen Meter

The ever increasing demand for instant on-site analysis results has created a need for innovative and rugged portable, waterproof meters.

Field work can subject instrumentation to the inclemency of weather. Cold, rain, snow, dust and humidity can cause condensation to breech the housing. Once the housing has been compromised, the meter is susceptible to diminishing performance and life. The rugged, waterproof housing of the HI 9142 solves many of the problems of field use.

Calibration is performed with HI 7040 zero oxygen solution, while 100% calibration is done in air.

The polarographic probe (HI 76407/4) is accurate to 0.3 ppm and is supplied with a
4 m (13‘) cable that allows measurements to be taken even in hard to reach places.

Order Information:
HI 9142 is supplied with HI 76407/4 probe with 4 m (13’) cable, 2 spare membranes, HI 7041S electrolyte solution (30 mL), calibration screwdriver, batteries, instructions and rugged carrying case.
HI 9142/10 is supplied with everything above but substitutes a 10 m (32.8’) probe cable for the 4 m.
HI 9142/20 is supplied with everything above but substitutes a 20 m (65.6’) probe cable for the 4 m.

Range	O₂	0.0 to 19.9 mg/L (ppm)
	Temperature	-5.0 to 50.0ºC (32.0 to 122.0ºF)
Resolution	O₂	0.1 mg/L (ppm)
	Temperature	0.1°C (1ºF)
Accuracy (@20°C)	O₂	±1.5% F.S.
	Temperature	±0.2°C (±1ºF) (excluding probe error)
Calibration		manual, at one or two points (zero and slope)
Temperature Compensation		automatic, 0 to 50°C (32 to 122°F)
Probe		HI 76407/4 polarographic DO probe with internal temperature sensor, DIN connector and 4 m (13’) cable
Battery Type / Life		1.5V AAA (3) / approximately 1,000 hours of continuous use
Environment		0 to 50°C (32 to 122°F); RH max 95%
Dimensions		185 x 72 x 36 mm (7.3 x 2.8 x 1.4”)
Weight		300 g (10.6 oz.)